296-806-47508  <<  296-806-480 >>   296-806-48001

WAC 296-806-480

Saws and cutting heads.

Summary
If your specific machine or operation is not listed here, then be sure to follow any of the following requirements that apply:
(1) General requirements for all saws and cutting heads in this section.
(2) General requirements for all saws in this section.
(3) General requirements for all cutting heads in this section.
(4) "Requirements for all machines" found in this chapter, WAC 296-806-200 and 296-806-300.
Reference:
For requirements on hand-held tools, see Portable power tools, chapter 296-807 WAC.
This section applies to fixed machines using saws or cutting heads that are used on any material.
Your responsibility:
To make sure machines using saws and cutting heads meet these requirements.
Requirements for this topic…
begin with this section:
GENERAL REQUIREMENTS FOR ALL SAWS AND CUTTING HEADS
 
 
SAWS
 
General Requirements for All Saws
Requirements for All Circular Saws
Requirements for Specific Circular Saws
Requirements for Band Saws and Drag Saws
 
 
CUTTING HEADS
 
General Requirements for All Cutting Heads
 
 
BORING AND MORTISING MACHINES
 
 
CHIPPER AND HOG MILLS
 
 
JOINTERS
 
 
MOLDING, STICKING AND MATCHING MACHINES
 
 
PANEL RAISERS AND OTHER SIMILAR MACHINES
 
 
PLANERS
 
 
SHAPERS
 
 
TENONING MACHINES
 
 
VENEER MACHINERY
 
 
SEWING MACHINES
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-480, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-480, filed 6/29/04, effective 1/1/05.]
Site Contents
Selected content listed in alphabetical order under each group