Meet these requirements when the operator leaves the normal operating position.

(1) You must make sure operators do the following when getting off the PIT:
(a) Fully lower the load engaging means;
(b) Neutralize the controls;
(c) Set the brakes.
(2) Make sure operators do the following when leaving a PIT unattended:
(a) Fully lower the load engaging means;
(b) Neutralize the controls;
(c) Shut off power;
(d) Set the brakes;
(e) Block the wheels, if parked on an incline.
Note:
A PIT is unattended when the operator:
 
1. Is more than twenty-five feet away; or
 
2. Cannot see the PIT.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. WSR 17-18-075, § 296-863-40020, filed 9/5/17, effective 10/6/17; WSR 04-19-051, § 296-863-40020, filed 9/14/04, effective 2/1/05.]
Site Contents
Selected content listed in alphabetical order under each group