HTML has links - PDF has Authentication
296-303-02003  <<  296-303-02005 >>   296-303-02007

PDFWAC 296-303-02005

Finishing machines.

(1) Dampening machine. Each roll-dampening machine must be so equipped that the rolls will be entirely enclosed and so arranged as to prevent the fingers of the operator or other person from being caught between the rolls. This may be accomplished by:
(a) A slot or hopper;
(b) A rod or strip located directly in front of the feed and extending the full length of the rolls.
(2) Ironer.
(a) Each flat-work or collar ironer must be equipped with a safety bar or other guard across the entire front of the feed or first pressure rolls, so arranged that the striking of the bar or guard by the hand of the operator or other person will stop the machine. The pressure rolls must be covered or guarded so that the operator or other person cannot reach into the rolls without removing the guard. This may be either a vertical guard on all sides or a complete cover. If a vertical guard is used, the distance from the floor or working platform to the top of guard must not be less than six feet.
(b) Each body-type ironer, roll or shoe type, including sleeve and band ironers, must be equipped with a safety bar or other guard across the entire length of the feed roll or shoe, so arranged that the striking of the bar or guard by the hand of the operator or other person will stop the machine. The hot roll or shoe must also be covered in such a way that the operator or other person cannot come into contact with the heated surfaces.
(c) Each combined rotary-bosom and coat ironer must be equipped with a safety bar or other guard across the entire length of the feed roll or shoe, so arranged that the striking of the bar or guard by the hand of the operator or other person will stop the machine. The hot roll or shoe must also be covered in such a way that the operator or other person cannot come into contact with the heated surfaces.
(d) Each ironing press (excluding hand or foot powered ones) must be equipped with a guard or means that will prevent the fingers of the operator or other person from being caught between the ironing surfaces.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. WSR 17-18-075, § 296-303-02005, filed 9/5/17, effective 10/6/17; Order 74-18, § 296-303-02005, filed 5/6/74.]
Site Contents
Selected content listed in alphabetical order under each group