WAC 308-30-070:

WACs > Title 308 > Chapter 308-30 > Section 308-30-070

HTML has links - PDF has Authentication

Print This Page

308-30-060 << 308-30-070 >> 308-30-080

Agency filings affecting this section

PDFWAC 308-30-070

Size and form of official seal or stamp.

An official seal or stamp shall conform to the following requirements:

(1) The seal or stamp shall include the following information:

(a) The words "notary public";

(b) The words "state of Washington";

(d) The notary public's commission expiration date; and

(e) The notary public's commission number.

(2) The type on this seal or stamp shall be a minimum of 8 point type.

(3) The seal or stamp shall conform to the following physical requirements:

(a) The seal or stamp shall be minimum one and five-eighths inches diameter if circular, or one inch wide by one and five-eighths inches long if rectangular;

(b) The face of the seal or stamp shall be permanently affixed; and

(c) If the stamp is affixed to a tangible record, it shall be applied in permanent ink and shall be capable of being photocopied.

(4) The seal or stamp shall not contain the Washington state seal.

[Statutory Authority: RCW 42.45.250. WSR 18-12-028, § 308-30-070, filed 5/29/18, effective 7/1/18. Statutory Authority: RCW 42.44.190. WSR 93-05-009, § 308-30-070, filed 2/5/93, effective 3/8/93. Statutory Authority: 1985 c 156 §§ 5 and 20. WSR 85-24-025 (Order PL 571), § 308-30-070, filed 11/26/85, effective 1/1/86.]