WSR 17-10-031

PERMANENT RULES

WASHINGTON STATE PATROL

[Filed April 26, 2017, 9:05 a.m., effective May 27, 2017]

Effective Date of Rule: Thirty-one days after filing.

Purpose: To update and provide clarity and constancy in terms used throughout chapter 212-80 WAC and cleanup existing language.

Citation of Existing Rules Affected by this Order: Amending WAC 212-80-018 and 212-80-093.

Statutory Authority for Adoption: RCW 18.270.900 and 18.160.030.

Adopted under notice filed as WSR 16-21-056 on October 13, 2016.

Changes Other than Editing from Proposed to Adopted Version: The following changes were made based on stakeholder written statements and verbal comments.

•	Changed the work performed under "journey-level sprinkler fitter certification" in WAC 212-80-018 (2)(c)(i) to include the different types of materials a sprinkler fitter would work. Also added language to provide the latitude for work done inside and outside of a building on a fire sprinkler system.
•	Changed the wording that the type of sprinkler fitter supervising a "trainee-level sprinkler fitter" in WAC 212-80-018 (2)(c)(iii) is certified to level of the work being performed by the trainee (compared to services being provided).
•	Added clarifying language to "For journey-level sprinkler fitter certification" in WAC 212-80-093 (1)(f)(ii). Adding "required eight thousand hours of" is needed. Only three thousand of the total eight thousand hours can come from residential installation.

Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.

Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.

Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 2, Repealed 0.

Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 2, Repealed 0.

Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0; Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 0, Repealed 0.

Date Adopted: April 25, 2017.

John R. Batiste

Chief

AMENDATORY SECTION (Amending WSR 14-03-019, filed 1/7/14, effective 2/7/14)

WAC 212-80-018 License and certification requirements.

(1) Fire protection sprinkler contractors, only a licensed contractor, who has at least one certificate holder on staff certified to license level consistent with the contractor's license, by the director, can bid, offer to bid, contract, or perform the designing, installation, inspection, testing, maintenance, or repair of a NFPA fire protection sprinkler system or any part of such a system based on the level of the contractor license. The following levels will apply to contractor licenses issued by the director:

(a) Level 1 contractor license - ((NFPA 13D, and underground work (NFPA 24) or inspection, testing and maintenance (NFPA 25) for)) Residential structures consistent with the definitions found within NFPA 13D.

(b) Level 2 contractor license - ((NFPA 13D or NFPA 13R and underground work (NFPA 24) or inspection, testing and maintenance (NFPA 25) for NFPA 13D or NFPA 13R.)) Residential structures consistent with the definitions found within NFPA 13D, NFPA 13R, and NFPA 25. NFPA 24 is applicable only when the water main supplying the fire sprinkler system is equal to or greater than four inches in size.

(c) Level 3 contractor license - ((NFPA 13D, NFPA 13R, NFPA 13 systems, or underground work (NFPA 24) or inspection, testing and maintenance (NFPA 25).)) Includes work defined by Levels 1 and 2. This license is applicable to structures and fire protection sprinkler systems defined in NFPA 13, NFPA 24, and NFPA 25.

(d) Level U contractor license – Specialized license for underground work (NFPA 24) only.

(e) Level I&T (inspection and testing) contractor license - Specialized license for inspection and testing work (NFPA 25). This license level allows for inspection or testing of a ((NFPA 13D,)) NFPA 13R((,)) or NFPA 13, wet and dry pipe fire protection sprinkler system, provided that the:

(i) Inspection and testing technician must limit his or her work on the fire protection sprinkler system to the contractor's license level; and

(ii) Testing and maintenance of fire protection sprinkler systems such as preaction, deluge, foam or fire pumps, will be performed only by contractors who are also qualified and licensed to design and install that type of system or fire pump.

Chart 1: Fire Protection Sprinkler Contractors


Level of Contractor License	Standard Defining Work to be Performed
Level of Contractor License	NFPA 13D	NFPA 13R	NFPA 13	NFPA 24	NFPA 25
Level 1 Contractor One- and two-family dwellings and manufactured homes	Yes	No	No	((Yes)) No	((Yes (See WAC 212-80-018 (e)(i)))) No
Level 2 Contractor Residential Occupancies Up To and Including Four Stories in Height	Yes	Yes	No	((Yes)) No Only if water main supplying the sprinkler system is equal or greater than 4 inches in size. (See WAC 212-80-018 (1)(b))	Yes (See WAC 212-80-018 (e)(i))
Level 3 Contractor All Types of Structures	Yes	Yes	Yes	Yes	Yes (See WAC 212-80-018 (e)(i))
Level U Contractor Underground	No	No	No	Yes	No
Level I&T Inspection and Testing Contractor	No	No	No	No	Yes Inspection/testing only (See WAC 212-80-018 (e)(ii))

(2) Fire protection sprinkler system certification – Only a certificate holder may prepare layout drawings or install, inspect, test, maintain, or repair a fire protection sprinkler system or any part of such a system based on his or her design certification level.

(a) Design certification - The following levels will apply to design certifications issued by the director:

(i) Level 1 design certification - NFPA 13D((, and underground work (NFPA 24) or inspection, testing, and maintenance (NFPA 25) for NFPA 13D)).

(ii) Level 2 design certification - NFPA 13D or NFPA 13R, and underground work (NFPA 24) when the designed and installed underground main is four inches or greater in size or inspection, testing, and maintenance (NFPA 25) for ((NFPA 13D or)) NFPA 13R.

(iii) Level 3 design certification - NFPA 13, NFPA 13R, or NFPA 13D, underground work (NFPA 24), and inspection, testing, and maintenance (NFPA 25) for NFPA 13D, NFPA 13R, and NFPA 13.

(b) Specialized certifications - The following level will apply to specialized certifications issued by the director:

(i) Level U certification - NFPA 24; supervise the installation, inspection, and testing of the underground fire protection sprinkler underground piping.

(ii) Level ITT - Inspection and testing technician – NFPA 25 for inspection or testing of a ((NFPA 13D,)) NFPA 13R((,)) or NFPA 13, wet and dry pipe fire protection sprinkler. The inspection and testing technician must limit his or her work to the inspection and testing contractor's license level under subsection (1)(e) of this section.

(c) Sprinkler fitter certifications - The following levels will apply to specialized certifications issued by the director:

(i) Journey-level sprinkler fitter certification - Installs, dismantles, alters, maintains, repairs, and corrects all types of sprinkler, standpipe, hose, or other hazard systems for fire protection purposes that are an assembly of piping, conduit, tubing, or hose regardless of the material composition beginning at the connection to the primary water supply. Also includes sprinkler tank heater, air lines tanks, pumps, equipment, appurtenances and all other related components attached thereto inside or outside of the building.

(ii) Residential-level sprinkler fitter certification - Limited to installation, maintenance, and repair of the fire protection sprinkler system of residential occupancies as defined by NFPA 13D and NFPA 13R. A residential level sprinkler fitter certification may also perform installation and repair of NFPA 13 fire protection sprinkler systems and components while under the direct supervision of a certified journey-level sprinkler fitter.

(iii) Trainee-level sprinkler fitter certification - Limited to performing sprinkler fitter work under the direct supervision of a journey-level sprinkler fitter or residential sprinkler fitter certified to perform the type of work the trainee-level sprinkler fitter is performing.

Chart 2: Fire Protection Sprinkler Certifications


Level of Certificate Holder – See Note (1)	Standard Defining Work That May Be Performed
Level of Certificate Holder – See Note (1)	NFPA 13D	NFPA 13R	NFPA 13	NFPA 24	NFPA 25
Level 1 Design Certification	Yes	No	No	((Yes (NFPA 13D Systems Only))) No	No
Level 2 Design Certification	Yes	Yes	No	Yes (((NFPA 13D and/or NFPA 13R Systems Only))) (Restricted to only certain NFPA 13R systems) (see WAC 212-80-018 (1)(b))	((No)) Yes (Restricted to only 13R systems)
Level 3 Design Certification	Yes	Yes	Yes	Yes	((No)) Yes
Level U ((Design)) Certification	No	No	No	Yes	No
Level ITT ((Design)) Certification	No	No	No	No	Yes See subsection (1)(e) of this section for exceptions
Journey-Level Sprinkler Fitter	Yes	Yes	Yes	No	No
Residential-Level Sprinkler Fitter	Yes	Yes	Only if under the direct supervision of a journey-level sprinkler fitter	No	No
Trainee-Level Sprinkler Fitter	Only if under the direct supervision of a residential/journey-level sprinkler fitter	Only if under the direct supervision of a residential/journey-level sprinkler fitter	Only if under the direct supervision of a journey-level sprinkler fitter	No	No

Chart 3: Certificate Level Required for Level of License


Contractor Level	1	2	3	U	I&T
Building Type	One- and two-family dwellings and manufactured homes	Dwellings up to and including four stories in height	All dwellings and commercial or high occupancy facilities	Dedicated underground fire service main of a water based fire protection system	Inspection, testing, and maintenance of water based fire protection systems
Certificate Holder Level Needed to Qualify for License	1	2	3	U	ITT

(3) May a person who has two levels of certification as provided by subsection (2) of this section work for two different licensed contractors if the person only uses one type of certification for each licensed contractor? No. RCW 18.160.040(10) prohibits a certificate holder from working for more than one licensed contractor.

(4) May a contractor obtain a fire protection sprinkler system license if the contractor employs only sprinkler fitters? No. A sprinkler fitter may only install piping from approved plans with a design certification.

AMENDATORY SECTION (Amending WSR 14-03-019, filed 1/7/14, effective 2/7/14)

WAC 212-80-093 Certificate holder certification.

(1) How do I become a certificate holder? The issuance of a certificate is dependent on employment with a licensed contractor. All applications for a certificate must be submitted with the fire protection sprinkler system contractor's license application. A certificate application will not be processed without the fire protection sprinkler system contractor's license application. All applications must be made on the forms provided by the director and include the required fees provided by WAC 212-80-098 and documentation for the required level of certification as provided by this section.

(a) For Level 1 design certification, the applicant must:

(i) Have satisfactorily passed with a final score of eighty percent or better an examination administered by the director, or present a copy of a current certificate from the National Institute for Certification in Engineering Technologies showing that the applicant has achieved Level 2 certification in the field of water-based fire protection system layout; or

(ii) Be a Washington licensed professional engineer.

(b) For Level 2 design certification, the applicant must:

(i) Present a copy of a current certificate from the National Institute for Certification in Engineering Technologies showing that the applicant has achieved a Level 2 in the field of water-based fire protection systems layout; or

(ii) Be a Washington licensed professional engineer.

(i) Present a copy of a current certificate from the National Institute for Certification in Engineering Technologies showing that the applicant has achieved a Level 3 in the field of water-based fire protection systems layout; or

(ii) Be a Washington licensed professional engineer.

(d) For Level U certification, the applicant must have satisfactorily passed with a final score of eighty percent or better an examination administered by the director.

(e) For inspection and testing technician certification, the applicant must:

(i) Possess a National Institute for Certification and Engineering Technologies Inspection, Testing and Maintenance Level 2 or Level 3 certification; and

(ii) Perform work consistent with the employing contractor's licensing level.

(f) For journey-level sprinkler fitter certification, the applicant must:

(i) Provide evidence on the forms provided by the director of at least eight thousand hours of trade related fire protection sprinkler system experience in installation and repair;

(ii) Not have more than three thousand hours of the required eight thousand hours of experience in residential sprinkler fitting; and

(iii) Satisfactorily pass an examination provided by the director with a final score of eighty percent.

(g) For residential sprinkler fitter certification, the applicant must:

(i) Provide evidence on the forms provided by the director, of at least four thousand hours of trade related fire protection sprinkler system experience in installation, repair, and maintenance; and

(ii) Satisfactorily pass an examination provided by the director with a final score of eighty percent.

(h) For journey- or residential-level sprinkler fitter training certification, except as provided by (g)(i) of this subsection, the applicant must:

(i) Provide evidence to the director, on the forms provided by the director, of trade related employment by a licensed contractor;

(ii) Remain employed by a licensed contractor to maintain trainee status; and

(iii) Only engage in the fire protection sprinkler system trade when under the supervision of a certified journey level or residential installer.

(i) For a professional engineer ((is exempt from certification when acting solely in a professional capacity.)) to act as a Level 1, 2, or 3 certificate of competency holder and be issued a stamp, the professional engineer must:

(i) Be licensed by the department of licensing;

(ii) Obtain a Level 1, Level 2, or Level 3 certificate;

(iii) Properly register with the department of licensing;

(iv) Complete the application process for certification provided by WAC 212-80-093;

(v) Pay fees provided by WAC 212-80-073; ((and))

(vi) Supply the director with proof that he or she holds a current, valid state of Washington registration as a professional engineer; and

(vii) Otherwise the professional engineer is exempt from certification when acting solely in a professional capacity as an engineer.

(2) Proof of competency to the satisfaction of the director is mandatory.


Certificate of Competency Holder Requirements
Certificate of Competency Level	Application Required	Certification or Exam Required	Stamp Issued	Type of work performed by Certificate Holder
Level 1	Yes	NICET Level 2 or pass an exam (See (((a) of this subsection)) WAC 212-80-093 (1)(a))	Yes	Designs NFPA 13D fire sprinkler systems or inspection, testing, maintenance (NFPA 25) for NFPA 13D
Level 2	Yes	NICET Level 2 (See (((b) of this subsection)) WAC 212-80-093 (1)(b))	Yes	Designs NFPA 13D, 13R or certain NFPA 24 (Restricted to only certain NFPA 13R systems, see WAC 212-80-018 (1)(b)) fire sprinkler systems or inspection, testing, maintenance (NFPA 25) for NFPA 13D or 13R
Level 3	Yes	NICET Level 3 or 4 (See (((b) of this subsection)) WAC 212-80-093 (1)(b))	Yes	Designs NFPA 13, 13D, 13R or 24 fire sprinkler systems or inspection, testing, maintenance (NFPA 25) for NFPA 13, 13D or 13R
Level "U"	Yes	Pass an exam (See (((c) of this subsection)) WAC 212-80-093 (1)(c))	Yes	Supervises or performs the underground installation of fire sprinkler system piping ((regardless of the level it will be at the above ground connection, (i.e., Level 1, 2, or 3)))
Inspection, Testing Technician (ITT) Employed by an Inspection & Testing Contractor	Yes	NICET Level 2 (See (((d) of this subsection)) WAC 212-80-093 (1)(d))	No	Performs inspection or testing on NFPA ((13D,)) 13R((,)) or 13, wet and dry pipe fire protection systems only
Inspection, Testing Technician (ITT) Employed by a Level ((1 or)) 2 Contractor	Yes	NICET Level 2 (See (((d) of this subsection)) WAC 212-80-093 (1)(d))	No	Performs inspection, testing and maintenance on NFPA ((13D,)) 13R((,)) or 13, wet and dry pipe fire protection systems only
Inspection, Testing Technician (ITT) Employed by a Level 3 Contractor	Yes	NICET Level 2 (See (((d) of this subsection)) WAC 212-80-093 (1)(d))	No	Same as ITT above and includes the testing of other fire protection systems such as preaction, deluge, foam, or fire pump
Journey Sprinkler Fitter	Yes	Pass an exam (See (((e) of this subsection)) WAC 212-80-093 (1)(e))	No	Installs and repairs NFPA 13D, 13R, or 13 fire sprinkler systems
Residential Sprinkler Fitter	Yes	Pass an exam (See (((f) of this subsection)) WAC 212-80-093 (1)(f))	No	Installs, repairs, and performs maintenance on fire sprinkler systems in residential occupancies
Professional Engineer (P.E.) Licensed in Washington State	((No)) Only if acting as a Level 1, 2 or 3 certificate of competency holder	Licensed with department of licensing	By DOL unless acting as a Level 1, 2, or 3 certificate of competency holder	Designs, evaluates or consults on fire protection fire sprinkler systems

(3) All information submitted by an applicant to the director to apply for a certificate must be true and accurate. If the director finds that information or documents submitted by an applicant is false, misleading, or has been altered in an effort to meet the requirements provided by this chapter, the finding will constitute a level 3 violation.

(4) A violation of this section that involves a contractor allowing an employee to engage in performing fire protection sprinkler system work:

(a) Without a license or certificate, or with a license or certificate that has been expired for one or more years is a level 3 violation.

(b) With a license or certificate that has been expired for more than ninety days and less than one year is a level 2 violation.

(d) By engaging in the trade of fire sprinkler fitting without having a valid sprinkler fitter certificate of competency issued for the work being conducted is a level 3 violation.

(e) By a trainee sprinkler fitter engaging in the trade of fire sprinkler fitting without the direct supervision of a certified residential or journey sprinkler fitter is a level 3 violation.

(f) As a trainee without a trainee certificate but with the direct supervision of a certified residential or journey sprinkler fitter is a level 1 violation.