PERMANENT RULES
FOR PROFESSIONAL ENGINEERS
AND LAND SURVEYORS
Effective Date of Rule: July 1, 2008.
Purpose: SSB 5984, chapter 193, Laws of 2007, established that only structural engineers can perform engineering work on significant structures. The rules are needed to reflect the changes made to chapter 18.43 RCW that impact those professional engineers that perform structural work and establish a waiver of structural licensure for a limited period of time.
Citation of Existing Rules Affected by this Order: Amending chapter 196-12 WAC.
Statutory Authority for Adoption: RCW 18.43.035.
Adopted under notice filed as WSR 08-08-120 on April 2, 2008.
Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 4, Amended 0, Repealed 0.
Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.
Number of Sections Adopted on the Agency's Own Initiative: New 4, Amended 0, Repealed 0.
Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 4, Amended 0, Repealed 0.
Number of Sections Adopted Using Negotiated Rule Making: New 4, Amended 0, Repealed 0; Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 0, Repealed 0.
Date Adopted: May 7, 2008.
George A. Twiss
Executive Director
OTS-1433.1
NEW SECTION
WAC 196-12-100
Limited waiver of the requirement for
licensure in structural engineering to design "significant
structures."
The board may grant a waiver of the licensing
requirement in structural engineering for qualified
candidates. Said waiver is available July 1, 2008. All
waivers issued by the board are not renewable and will expire
12:00 a.m. December 31, 2010. Individuals being issued the
waiver are not permitted to represent themselves as being
licensed in structural engineering or otherwise using any
title or advertisement tending to convey the impression he or
she is licensed in structural engineering.
[]
(1) Be licensed as a professional engineer in Washington state as of January 1, 2007;
(2) Submit an application for waiver that is postmarked on or before January 1, 2009. Said application to include:
(a) The names of at least three references who are licensed professional engineers with experience in seismic analysis and designs and who have direct knowledge and familiarity of the applicant's competency;
(b) Verification of at least six years of progressive structural engineering experience performing seismic analysis and design, since the date of original licensure as a PE; and
(c) Verification that qualifying experience was gained under the direct supervision of a professional engineer(s).
[]
[]
(1) Detailed review and evaluation of application;
(2) Interviews with named references;
(3) Review of examples of candidate's work product;
(4) Oral interview with candidate.
[]