WAC 296-806-48074:

WACs > Title 296 > Chapter 296-806 > Section 296-806-48074

HTML has links - PDF has Authentication

Print This Page

296-806-48073 << 296-806-48074 >> 296-806-48075

Agency filings affecting this section

PDFWAC 296-806-48074

Make sure shapers meet these requirements.

(1) You must guard the cutting head of the shaper by enclosing it with either:

(a) A fixed guard, such as a cage; or

(b) An adjustable guard designed to keep the operator's hand away from the cutting edge.

(2) You must make sure the diameter of a circular shaper guard is at least as large as the greatest diameter of the cutter.

Note:

A warning device of leather or other material attached to the spindle is not an acceptable substitute for a guard.

(3) You must guard all sections of the cutting tool except for an opening to allow access to the work piece by the cutting tool.

Note:

A ring guard is one means of satisfying the guarding requirement for cutting tools when involved in free hand or template shaping.

(4) You must make sure all double-spindle shapers have a spindle starting and stopping device for each spindle.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-48074, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-48074, filed 6/29/04, effective 1/1/05.]