• Make sure loads are properly slung so tag lines cannot be drawn up into rotors.
• Make sure precautions are taken on all freely suspended loads to keep hand splices from spinning open or cable clamps from loosening, such as using pressed sleeves or swedged eyes.
• Make sure the weight of the load does not exceed the manufacturer's load ratings.
• Make sure hoist wires and other gear are not
attached to or allowed to catch on any fixed structure.
|Exemption: ||This requirement does not apply to pulling lines or conductors that "pay out" from a container or reel. |
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-09-099, § 296-829-40015, filed 4/20/04, effective 9/1/04.]