WAC 296-806-48078:

WACs > Title 296 > Chapter 296-806 > Section 296-806-48078

HTML has links - PDF has Authentication

Print This Page

296-806-48076 << 296-806-48078 >> 296-806-48079

Agency filings affecting this section

PDFWAC 296-806-48078

Guard tenoning machines.

(1) You must make sure all cutting heads, and saws if used, are covered by a metal guard that:

(a) Covers at least the unused part of the periphery of the cutting head.

(b) Forms all or part of the exhaust hood if an exhaust system is used.

(2) You must make sure a guard constructed from:

(a) Sheet metal is at least one-sixteenth inch thick.

(b) Cast iron is at least three-sixteenths inch thick.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-48078, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-48078, filed 6/29/04, effective 1/1/05.]