HTML has links - PDF has Authentication
296-806-48055  <<  296-806-48056 >>   296-806-48058

PDFWAC 296-806-48056

Make sure jointers with horizontal cutting heads meet these requirements.

(1) You must make sure the cutting head on hand-fed jointers is cylindrical:
(2) You must install and adjust the knife blade so it does not protrude more than one-eighth inch beyond the body of the head.
(3) You must make sure the opening in the table meets all of the following:
(a) Is kept as small as possible.
(b) The clearance between the edge of the rear table and the cutting head is not more than one-eighth inch.
(c) The table throat opening is not more than two and one-half inches when the tables are set or aligned with each other for zero cut.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-48056, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-48056, filed 6/29/04, effective 1/1/05.]
Site Contents
Selected content listed in alphabetical order under each group